Custom Safety Products, Inc.

Safety Pad III Fire Test

Fire Test Protocol

• Client: Custom Safety Products Inc., USA
• Test Method: NT Fire 007, NS-INSTA 414
• Product: Marine Flooring System
• Product Name: Safety Pad II(FR)
• Samples Received: 1992-07-10
• Description of Samples: 4 samples with dimensions 1m x 0.4m in thickness approximately 32mm, with steel studs on top, protruding approximately 5mm from the top side, weight approximately 35 kg/sq. meter.
• Preparation of Specimens: The specimens were prepared by the client. The specimens were placed on 19mm thick chipboards during the testing.
• Conditions of Specimens: The specimens were stored in air with 50% relative humidity at 23C for 3 weeks.
• Number of Single Tests: 4
• Testing Time: 10 minutes
• Date of Test: 1992-07-31
• Operator: Ola Ronning, Technician
• Test Results for NT Fire 007 Floorings: (see chart below)

* The length of the damaged part of the flooring and of the chipboard is measured from the center of the ignition crib.
* Smoke is given as obscuration in % of total obscuration.

Observations	Single Test 1	Single Test 2	Single Test 3	Single Test 4	Average
Time for ignition of flooring	25 sec	25 sec	25 sec	25 sec	--
Time when flame dies out	6 min 55 sec	6 min 10 sec	6 min 40 sec	6 min 30 sec	--
Time when glow dies out	6 min 55 sec	7 min 5 sec	7 min 10 sec	7 min 20 sec	--
Length of damaged part of flooring	45 meters	50 meters	49 meters	47 meters	48 meters
Area of charred part of chipboard	0 sq. meters	0 sq. meters	0 sq. meters	0 sq. meters	0 sq. meters
Length of damaged part of chipboard	0 meters	0 meters	0 meters	0 meters	0 meters
Maximum smoke density during the first 5 min of testing	28%	30%	30%	30%	30%
Maximum smoke density after 5 min. of testing	5%	5%	5%	4%	5%

TEST CERTIFICATE

Test Conducted By: Sintef NBL, Norwegian Fire Research Laboratory, Trondheim, Norway Task No.: 250010.40/92.238 Test Method: NT Fire 007 - NS - INSTA 414 Intention of Test: Approval Product: Marine Flooring System Product Name: Safety Pad II(FR) Manufacturer: Custom Safety Products Inc., USA Product Description: Safety Pad II is molded from a high-strength, chemical resistant, urethane, equipped with steel studs in thickness approximately 32mm; weight approximately 35 kg/sq. meter. Sampling: Samples taken by client. Evaluation: The product satisfies the requirements regarding floorings in Class G. The product satisfies the requirements regarding approval of floorings by Det Norske Veritas.

---